PRODUCT DESCRIPTION
The PY300DC gate opener designed for residential use, weight up to 300 Kg and operating distance up to 8 meters. The drive mode adopts the rack and gear transmission. This gate opener must be installed inside the enclosure or yard for protection.
Main Features
- Brushed aluminum shell, novel appearance.
- DC24V motor with built-in control unit.
- Built-in backup battery.
- Solar system compatible.(optional)
- Keypad / single button interface.(optional)
- Alarm lamp, photo beam & safety beam interface.(optional)
- User can select auto-close function.(optional)
- Soft start and slow stop.(optional)
- Manual key release design for emergency purposes.
TECHNICAL SPECIFICATIONS
| Warranty | 1 Year |
| After-sale Service | Online technical support |
| Application | Villa |
| Design Style | Modern |
| Brand Name | SINOMATIC |
| Model Number | PY300DC |
| Product Name | PY300DC Sliding Gate Opener |
| Power supply | 220V/50Hz;110V/60Hz |
| Motor power | 100W |
| Gate Moving speed | 13m/min |
| Maximum weight of gate | 300Kg |
| Remote control distance | Single button mode |
| Limit switch | Electronic limit switch |
| Noise | ≤60dB |
| Working duty | S2, 20min |
| Recording of up remote controls | 20 |
| Working temperature | -20°C ~ +70°C |
| Storage battery | 24V 4.5Ah |
| Frequency | 433.92 MHz |
Standard Unit
- gate motor
- control board & box
- 2 remote controls
- manual release key
- user manual
- bolts & nuts
PTODUCT PHOTO
INSTALLATION
Before You Start
· PY300DC Sliding Gate Automation Kit is suitable for powering the opening and closing motion of gates up to 300kg in weight, up to a length of 8m.
· Gate motion is achieved by the rotating output gear of the gate opener driving the gear rack (sold separately) fitted to the moving gate.
· The gate opener requires you to press the remote control once to open, and once again to close. This is a safety feature to ensure safe operation.
· The opener must be fitted within private property, never externally to a property’s boun
NOTE: Any works done to the gate opener must be completed whilst the power is off and the opener is unplugged. Any modifications/alterations/works to AC power components must only be completed by a licensed electrician.
Tools Required
· Tape measure
· Level
· 12mm concrete drill and hammer (when uses expansion screws)
· Phillips head screwdriver
· Straight screwdriver
Maintenance
The gate should be checked every month to make sure it operates normally. For the sake of safety, each gate is suggested to be equipped with infrared protector, and regular inspection is required. Before installation and operation of the gate opener, please read all instructions carefully. Our company keep the right to change the
PY300DC user manual.pdf
Product Tags:
|
|
PY300DC Safety Sliding Gate Opener Aluminum Housing DC 24V Gate Motor Images
|
